Technical data sheet
Technical data sheet Otta Pillarguri
Stone · Norway · Imported directly and worked in our own workshops.


| Commercial name | Otta Pillarguri |
|---|---|
| Stone type | Stone |
| Colour | Grey |
| Origin | Norway — Imported directly and worked in our own workshops. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 200-300 × 120-180 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | floors, wall claddings, outdoor areas, façades · indoor; outdoor with care (non-polished finish, lot check) |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,400–2,800 kg/m³ | EN 1936 | typical value for the family |
| Water absorption | 0.2–2 % | EN 13755 | typical value for the family |
| Compressive strength | 60–200 MPa | EN 1926 | typical value for the family |
| Flexural strength | 6–20 MPa | EN 12372 | typical value for the family |
| Hardness (Mohs) | 3–7 | — | typical value for the family |
| Frost resistance | not intended for outdoor use | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Clean with water and a neutral detergent; avoid acids until the stone's composition is known. Sealer after laying; for outdoor use ask for the lot's absorption and frost data.
Lots available in stock
No lot published at the moment: ask for availability, the material is available to order.