Technical data sheet
Technical data sheet Onice Dorato
Onyx · Macedonia · Imported directly and worked in our own workshops.


| Commercial name | Onice Dorato |
|---|---|
| Stone type | Onyx |
| Colour | Yellow |
| Origin | Macedonia — Imported directly and worked in our own workshops. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 180-260 × 100-160 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | wall claddings, furniture and décor, bathrooms · indoor only |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,600–2,750 kg/m³ | EN 1936 | typical value for the family |
| Water absorption | 0.1–0.6 % | EN 13755 | typical value for the family |
| Compressive strength | 60–120 MPa | EN 1926 | typical value for the family |
| Flexural strength | 6–14 MPa | EN 12372 | typical value for the family |
| Hardness (Mohs) | 3–4 | — | typical value for the family |
| Frost resistance | not intended for outdoor use | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Delicate, translucent stone: indoor only, clean with a soft cloth and neutral detergent, no acids or abrasives. Sealer after laying; avoid standing water and knocks. Ideal backlit.
Lots available in stock
No lot published at the moment: ask for availability, the material is available to order.