Marmi di Carrara, since 1956
Get a quote

Lemunda

Imported directly and worked in our own workshops.

lemunda
Move the mouse or your finger over the photo: the lens magnifies.

The block in 3D

Turn it with your finger or by tilting your phone. The six faces come from the same photo.

Request this material Lemunda

We reply with photos of the slabs and a quote.

Data is used only to answer your request.

We use the data you enter only to reply and prepare the offer; we never sell it. Controller: Marmi di Carrara srl. Details, retention periods and your rights are in the privacy policy.

Design tools Edges and thickness in 3D Skirting boards Mouldings See it in your space Custom tables Custom bathroom

Lemunda is a natural stone, grey in colour, from: Sweden. Every slab of natural stone is different from the others: that is why in the online inventory every lot has photos of each slab.

Uses given on the sheet: floors, wall claddings, outdoor areas, façades. Finishes: polished, honed.

The price depends on the available lot: ask for a quote with photos of the slabs. Available on order: we source it from the quarry within the time stated in the quote.

Characteristics

TypeStone
OriginSweden
ColourGrey
Finishespolished, honed
Usesfloors, wall claddings, outdoor areas, façades
AvailabilityOn order
Indicative priceon request
Thicknesses and formatsSlabs are normally 2 and 3 cm thick; sizes are defined on the project and the material is cut to size in our workshop in Carrara.

Real sizes depend on the slabs of the lot: in the online inventory every lot lists the dimensions and a photo of each slab.

Commercial nameLemunda
Stone typeStone
ColourGrey
OriginSweden — Imported directly and worked in our own workshops.
Available finishespolished, honed
Standard thicknesses2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request
Typical slab sizes200-300 × 120-180 cm (real sizes of each lot on its warehouse page)
Recommended usesfloors, wall claddings, outdoor areas, façades · indoor; outdoor with care (non-polished finish, lot check)

Care and cleaning

Clean with water and a neutral detergent; avoid acids until the stone's composition is known. Sealer after laying; for outdoor use ask for the lot's absorption and frost data.

Indicative physical properties

Technical dataValueStandardSource
Density2,400–2,800 kg/m³EN 1936typical value for the family
Water absorption0.2–2 %EN 13755typical value for the family
Compressive strength60–200 MPaEN 1926typical value for the family
Flexural strength6–20 MPaEN 12372typical value for the family
Hardness (Mohs)3–7—typical value for the family
Frost resistancenot intended for outdoor useEN 12371

Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.

Lots available in stock

No lot published at the moment: ask for availability, the material is available to order.

Request a quote for this material →

Frequently asked questions about Lemunda

How much does Lemunda cost?
The price of Lemunda depends on the available lot, thickness and processing. Ask for a quote with sizes and destination: we reply within one working day with photos of the slabs.
Where does Lemunda come from?
Lemunda is a stone with origin Sweden. We work it in our workshop in Carrara.
What kind of stone is Lemunda?
Every slab of natural stone is different from the others: that is why in the online inventory every lot has photos of each slab.
What is Lemunda used for?
The uses given for Lemunda are: floors, wall claddings, outdoor areas, façades. Finishes given: polished, honed. We supply slabs, blocks and cut-to-size pieces, numbered and photographed.
Is Lemunda available?
Available on order: we source it from the quarry within the time stated in the quote.
What thicknesses and sizes does Lemunda come in?
Slabs are normally 2 and 3 cm thick; sizes are defined on the project and the material is cut to size in our workshop in Carrara. Real sizes depend on the slabs of the lot: in the online inventory every lot lists the dimensions and a photo of each slab.
How do you clean and maintain Lemunda?
Water and a neutral detergent are normally enough. A protective treatment before installation reduces the risk of stains, and for outdoor use an anti-slip finish is chosen.
How do I order Lemunda or ask for a sample?
Fill in the form on this page (private or professional, with the “sample” box if you want one) or message us on WhatsApp at +39 335 619 2407. We reply within one working day.
Can I see the slabs of Lemunda before buying?
Yes: we send you photos of the lot’s slabs, and you can choose by video call from the yard or come to Carrara.

Similar materials

WhatsApp