Technical data sheet
Technical data sheet Cristallo
Quartzite · Brazil · Imported directly and worked in our own workshops.


| Commercial name | Cristallo |
|---|---|
| Stone type | Quartzite |
| Colour | White |
| Origin | Brazil — Imported directly and worked in our own workshops. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 260-300 × 150-190 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | floors, kitchens, outdoor areas, façades · indoor, outdoor |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,550–2,750 kg/m³ | EN 1936 | typical value for the family |
| Water absorption | 0.1–0.5 % | EN 13755 | typical value for the family |
| Compressive strength | 150–280 MPa | EN 1926 | typical value for the family |
| Flexural strength | 12–25 MPa | EN 12372 | typical value for the family |
| Hardness (Mohs) | 6.5–7 | — | typical value for the family |
| Frost resistance | normally suitable (to be verified on the lot) | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Very hard and low porosity: water and a neutral detergent are enough. A sealer after laying helps on the more absorbent varieties. Always check the lot: some commercial quartzites contain calcareous veins sensitive to acids.
Lots available in stock
No lot published at the moment: ask for availability, the material is available to order.