Technical data sheet
Technical data sheet Brauvilliers
Limestone · France · Imported directly and worked in our own workshops.


| Commercial name | Brauvilliers |
|---|---|
| Stone type | Limestone |
| Colour | Beige |
| Origin | France — Imported directly and worked in our own workshops. |
| Petrography | Typically a fine‑grained limestone with a uniform beige to cream colour. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 220-300 × 120-180 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | floors, wall claddings, outdoor areas, façades · indoor; outdoor with care (non-polished finish, lot check) |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,300–2,700 kg/m³ | EN 1936 | typical value for the family |
| Water absorption | 0.3–3 % | EN 13755 | typical value for the family |
| Compressive strength | 50–150 MPa | EN 1926 | typical value for the family |
| Flexural strength | 5–15 MPa | EN 12372 | typical value for the family |
| Hardness (Mohs) | 3–4 | — | typical value for the family |
| Frost resistance | not intended for outdoor use | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Soft, absorbent limestone: neutral detergent, no acids, sealer after laying and every 1-2 years. Dry surfaces in bathrooms; outdoors check the lot's frost resistance.
Lots available in stock
No lot published at the moment: ask for availability, the material is available to order.