Marmi di Carrara, since 1956
Get a quote

Technical data sheet

Technical data sheet Bateig

Limestone · Italy · Imported directly and worked in our own workshops.

Marmi di Carrara - since 1956
Bateig calcare sample · Marmi di Carrara
Commercial nameBateig
Stone typeLimestone
OriginItaly — Imported directly and worked in our own workshops.
Available finishespolished, honed
Standard thicknesses2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request
Typical slab sizes220-300 × 120-180 cm (real sizes of each lot on its warehouse page)
Recommended usesfloors, wall claddings, bathrooms, kitchens, staircases · indoor; outdoor with care (non-polished finish, lot check)

Indicative physical properties

Technical dataValueStandardSource
Density2,300–2,700 kg/m³EN 1936typical value for the family
Water absorption0.3–3 %EN 13755typical value for the family
Compressive strength50–150 MPaEN 1926typical value for the family
Flexural strength5–15 MPaEN 12372typical value for the family
Hardness (Mohs)3–4—typical value for the family
Frost resistancenot intended for outdoor useEN 12371

Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.

Care and cleaning

Soft, absorbent limestone: neutral detergent, no acids, sealer after laying and every 1-2 years. Dry surfaces in bathrooms; outdoors check the lot's frost resistance.

Lots available in stock

No lot published at the moment: ask for availability, the material is available to order.

Request a quote for this material

Sheet generated on 17 November 2026 · Marmi di Carrara srl · Via Colombera 17, 54033 Carrara (MS) · info@marmidicarrara.com
www.marmidicarrara.com/en/materials/bateig
WhatsApp
Technical data sheet Bateig · Marmi di Carrara