Technical data sheet
Technical data sheet Arabescato Vagli
Marble · Italy · Imported directly and worked in our own workshops.


| Commercial name | Arabescato Vagli |
|---|---|
| Stone type | Marble |
| Colour | White |
| Origin | Italy · Alpi Apuane — Imported directly and worked in our own workshops. |
| Petrography | Typically a white marble with fine‑grained texture. |
| Available finishes | polished, honed |
| Standard thicknesses | 2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request |
| Typical slab sizes | 240-300 × 140-190 cm (real sizes of each lot on its warehouse page) |
| Recommended uses | floors, wall claddings, bathrooms, kitchens, staircases · indoor; outdoor with care (non-polished finish, lot check) |
Indicative physical properties
| Technical data | Value | Standard | Source |
|---|---|---|---|
| Density | 2,720 kg/m³ | EN 1936 | material record |
| Water absorption | 0.16 % | EN 13755 | material record |
| Compressive strength | 108.4 MPa | EN 1926 | material record |
| Flexural strength | 16.5 MPa | EN 12372 | material record |
| Hardness (Mohs) | 3–4 | — | typical value for the family |
| Frost resistance | normally suitable (to be verified on the lot) | EN 12371 | |
Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.
Care and cleaning
Clean with lukewarm water and a pH-neutral detergent, microfibre cloth; never acids, vinegar, lemon, limescale remover, bleach or abrasives. Wipe liquids at once. Water- and oil-repellent protective treatment after laying and every 1-2 years on the most used surfaces (kitchen tops, bathrooms).