Marmi di Carrara, since 1956
Get a quote

Technical data sheet

Technical data sheet Arabescato Corchia

Marble · Italy · Imported directly and worked in our own workshops.

Marmi di Carrara - since 1956
Arabescato Corchia marble sample · Marmi di Carrara
Commercial nameArabescato Corchia
Stone typeMarble
OriginItaly · Alpi Apuane — Imported directly and worked in our own workshops.
PetrographyArabescato Corchia is typically a white marble with grey veining.
Available finishespolished, honed
Standard thicknesses2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request
Typical slab sizes240-300 × 140-190 cm (real sizes of each lot on its warehouse page)
Recommended usesfloors, wall claddings, bathrooms, kitchens, staircases · indoor; outdoor with care (non-polished finish, lot check)

Indicative physical properties

Technical dataValueStandardSource
Density2,710 kg/m³EN 1936material record
Water absorption0.17 %EN 13755material record
Compressive strength86.8 MPaEN 1926material record
Flexural strength13.9 MPaEN 12372material record
Hardness (Mohs)3–4—typical value for the family
Frost resistancenormally suitable (to be verified on the lot)EN 12371

Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.

Care and cleaning

Clean with lukewarm water and a pH-neutral detergent, microfibre cloth; never acids, vinegar, lemon, limescale remover, bleach or abrasives. Wipe liquids at once. Water- and oil-repellent protective treatment after laying and every 1-2 years on the most used surfaces (kitchen tops, bathrooms).

Lots available in stock

Request a quote for this material

Sheet generated on 17 November 2026 · Marmi di Carrara srl · Via Colombera 17, 54033 Carrara (MS) · info@marmidicarrara.com
www.marmidicarrara.com/en/materials/arabescato-corchia
WhatsApp
Technical data sheet Arabescato Corchia · Marmi di Carrara