Marmi di Carrara, since 1956
Get a quote

Technical data sheet

Technical data sheet Alabastrino

Onyx · Italy · Imported directly and worked in our own workshops.

Marmi di Carrara - since 1956
Alabastrino onyx sample · Marmi di Carrara
Commercial nameAlabastrino
Stone typeOnyx
OriginItaly — Imported directly and worked in our own workshops.
PetrographyTypically grey stone.
Available finishespolished, honed
Standard thicknesses2, 3 and 4 cm (slabs in stock); 6 cm for steps and 1 cm for tiles on request
Typical slab sizes180-260 × 100-160 cm (real sizes of each lot on its warehouse page)
Recommended useswall claddings, furniture and décor, bathrooms · indoor only

Indicative physical properties

Technical dataValueStandardSource
Density2,600–2,750 kg/m³EN 1936typical value for the family
Water absorption0.1–0.6 %EN 13755typical value for the family
Compressive strength60–120 MPaEN 1926typical value for the family
Flexural strength6–14 MPaEN 12372typical value for the family
Hardness (Mohs)3–4—typical value for the family
Frost resistancenot intended for outdoor useEN 12371

Indicative values for the stone family: test certificates (EN 1936, EN 13755, EN 1926, EN 12372) for the chosen lot are provided on request.

Care and cleaning

Delicate, translucent stone: indoor only, clean with a soft cloth and neutral detergent, no acids or abrasives. Sealer after laying; avoid standing water and knocks. Ideal backlit.

Lots available in stock

No lot published at the moment: ask for availability, the material is available to order.

Request a quote for this material

Sheet generated on 17 November 2026 · Marmi di Carrara srl · Via Colombera 17, 54033 Carrara (MS) · info@marmidicarrara.com
www.marmidicarrara.com/en/materials/alabastrino
WhatsApp
Technical data sheet Alabastrino · Marmi di Carrara