Marmi di Carrara, since 1956
Get a quote

Marble products

Marble steps

Marble steps are the individual elements you climb up or down: they are used for internal and external staircases, entrances, gardens and porticoes. They are chosen where a robust element is needed to withstand repeated foot traffic.

Request a quote

How to choose

The usual thickness is normally 3-4 cm, and even more for external or monolithic steps. The finish must be non-slip, especially where there is rain, and the stone compact and low in absorption. Monolithic steps in a single piece are sturdier than those made up of riser and tread.

Fabrication and installation

They are cut to size with finished edges, bullnose or chamfered, and with non-slip grooving on the surface. They are laid on a bed of mortar with a slight fall for water run-off, if external.

Care and maintenance

Regular cleaning with a neutral detergent and care with ice, avoiding salt and aggressive products on the stone. Check for any chipping on the edge.

Materials for steps

Frequently asked questions

Is a monolithic or a composite step better?
The monolithic one is more solid and durable, but heavier and more expensive to handle. The composite one, with riser and tread, is easier to lay on existing staircases.
Can I use the same marble for external steps?
It depends on the stone: not all marbles stand up well to frost and rain. For outdoor use a suitable variety must be chosen.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp