Marmi di Carrara, since 1956
Get a quote

Marble products

Marble pool copings

Pool copings are the stone elements that finish the perimeter of the pool, where the water meets the paving. They are chosen in marble or stone to obtain a precise, non-slip profile that is pleasant to the touch.

Request a quote

How to choose

The thickness is normally around 3 cm for copings with a rounded (bullnose) profile, which guarantee a secure grip. The finish must be non-slip and the material low in absorption; for infinity pools, pieces with a channel or special pieces are needed. Always check compatibility with chlorine or salt.

Fabrication and installation

Copings are cut with a rounded or owl-beak profile, with finished ends. They are laid on a bed of mortar or a specific adhesive for wet environments, with a flexible joint towards the pool shell.

Care and maintenance

Rinse after use and wash with non-aggressive products to prevent limescale build-up. Check joints and seals from time to time.

Materials for pool copings

Frequently asked questions

Why does the coping have a rounded profile?
It avoids sharp edges at the point where hands and feet rest, and is safer. It also allows the water to run off more evenly.
Does pool salt damage the stone?
It can accelerate the wear of some calcareous stones if untreated. It is advisable to choose suitable materials and protect them, always on the supplier's advice.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp