Marmi di Carrara, since 1956
Get a quote

Marble products

Marble pillars

The stone pillar is a vertical support with a square or rectangular section, in solid block or clad with slabs. It is chosen for porticoes, entrances and structures where visual solidity is needed.

Request a quote

How to choose

A load-bearing pillar requires calculation by an engineer and stones with good compressive strength. If it is only cladding over a concrete structure, well-anchored slabs of 2-3 cm are enough. Bush-hammered or brushed finishes are better suited to outdoor use.

Fabrication and installation

The blocks are squared precisely and laid on thin mortar beds; for claddings, steel brackets are used. The corners are bevelled or rounded to prevent chipping.

Care and maintenance

Light washing and checking of the joints. At the base, the stone can be protected from knocks and splashes of dirty water.

Materials for pillars

Frequently asked questions

Is a clad pillar less solid?
The cladding does not replace the structure, which remains load-bearing. If well anchored, it offers the same appearance as a solid block with less weight.
What joints are used between the blocks?
Thin joints with mortars suited to the stone, designed so as not to stain it. The type of mortar is chosen according to the climate and the material.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp