Marmi di Carrara, since 1956
Get a quote

Marble products

Marble outdoor and pool paving

Stone paving for outdoor areas and pools covers terraces, patios and pool surrounds, where it must withstand water, sun and frost. It is chosen when continuity between house and garden is wanted with a natural material.

Request a quote

How to choose

The usual thickness is normally 2-3 cm, and even more for laying on gravel or raised supports. Outdoors the finish must be non-slip, such as flamed, brushed or bush-hammered, never polished. Low-absorption, frost-tested stones are required; not all marbles are suitable and it is prudent to check case by case.

Fabrication and installation

The slabs are cut to size with a chamfered edge and treated against absorption. Installation requires falls towards the drains, open joints for water run-off and exterior-grade adhesives.

Care and maintenance

Wash periodically to remove dust, algae and deposits, avoiding aggressive products. Beware of pool chlorine and salts, which can mark some stones.

Materials for outdoor and pool paving

Frequently asked questions

Can white marble be used around a pool?
Yes, some light varieties stay cool underfoot and are widely used. A non-slip finish must be chosen and compatibility with chlorine or salt checked.
Does it get hot under the summer sun?
Light stones heat up less than dark ones, and rough finishes dissipate heat slightly better. Behaviour varies with the material and the exposure.

From the quarry to your project

Request a quote

Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.

WhatsApp