Marble products
Marble fireplaces
The marble fireplace is a stone surround that frames the hearth, with mantel shelf, jambs and hearth slab. It is chosen to give the living room a classic or modern feature, in local or prestigious stone.
Request a quoteHow to choose
Marble withstands indirect heat well, but the parts close to the fire must be protected with refractory material and set at the distances required by regulations. Thicknesses of 2-3 cm are used for the cladding and more generous ones for the mantel shelves. A honed or satin finish is better, as it is easier to clean of soot.
Fabrication and installation
The elements are cut and profiled with routers, then assembled on site with brackets and heat-resistant adhesives. A gap or a refractory insulating layer is left between the stone and the firebox to allow for expansion.
Care and maintenance
Soot and smoke marks are cleaned with gentle products, avoiding aggressive solvents. Periodic checks of joints and fixings are useful.
Materials for fireplaces

Arabescato
marble

Arabescato Alpino
marble white

Arabescato Cervaiole
marble white

Arabescato Corchia
marble

Arabescato Orobico Rosso
marble red

Arabescato Vagli
marble white

Azul Bahia
granite blue

Azul Macaúbas
quartzite blue

Bardiglio
marble grey

Bardiglio Imperiale
marble grey

Bardiglio Nuvolato
marble grey

Bianco Carrara
marble white

Bianco Carrara C
marble white

Bianco Carrara C Extra
marble white

Bianco Carrara CD
marble white

Bianco Carrara S Extra
marble white

Bianco Carrara Venato
marble white

Bianco Gioia
marble white

Bianco Statuario Classico
marble white

Calacatta Atlantico
marble white

Calacatta Borghini
marble white

Calacatta Carrara
marble white

Calacatta Gold
marble white

Calacatta Gold Vein
marble white
Frequently asked questions
- Does marble withstand the heat of the fireplace?
- It withstands indirect heat, but it can be damaged if exposed to the flame or to sharp temperature changes. This is why the firebox area is made of refractory material and the marble remains as the outer surround.
- Can an existing fireplace be clad?
- Yes, in many cases a made-to-measure surround is built onto the existing structure. A site survey is needed first to check safety distances and the support.
From the quarry to your project
Request a quote
Sizes, photos or a drawing: we reply within one working day with photos of the available slabs.
