Onice Bianco for wall cladding: slabs and bundles in stock in Carrara
In the Carrara warehouse Onice Bianco is present with 10 bundles that suit wall cladding: 423 slabs, 1,946 m², thickness 2 and 3 cm and finish polished. The average slab of MDC-87 measures about 2.59 × 1.78 m, and the bundle counts 55 slabs. Imported directly and worked in our own workshops.
Onice Bianco, white onyx, recommended for fireplaces and decorative objects.
Why Onice Bianco for wall cladding
Onyx slabs are usually reinforced with a fibre mesh and resin on the back: they are worked with care and laid on perfectly flat substrates.
On tall or continuous walls consecutive slabs from the same bundle matter: the veining runs on from one to the next, and the progressive number helps to lay them in order.
Onyx on a wall is often backlit: a technical cavity is needed behind the slab for the LEDs and for ventilation.
The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
Consecutive slabs give book-matched panels, trimmed flush and mitred at 45° for the corners.
Indicative yield of the largest bundle: about 222 m² of wall, after a 12% allowance for waste.
Laying and care
In damp rooms the stone is laid with white adhesive (so as not to stain light stones) and sealed joints.
Of these bundles 4 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
We also hold 3 blocks of Onice Bianco in stock: for a large project the block can be chosen and sawn to size.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Onice Bianco MDC-87
55 slabs, 3 cm, polished, 2.59 × 1.78 m, yield ≈ 222 m² of wall

Onice Bianco MDC-91
54 slabs, 2 cm, polished, 2.67 × 1.67 m, yield ≈ 213 m² of wall

Onice Bianco MDC-90
52 slabs, 2 cm, polished, 2.62 × 1.77 m, yield ≈ 212 m² of wall

Onice Bianco MDC-89
49 slabs, 2 cm, polished, 2.59 × 1.72 m, yield ≈ 192 m² of wall

Onice Bianco MDC-88
46 slabs, 2 cm, polished, 2.74 × 1.65 m, yield ≈ 183 m² of wall

Onice Bianco MDC-08
42 slabs, 3 cm, polished, 2.78 × 1.64 m, yield ≈ 168 m² of wall

Onice Bianco MDC-57
41 slabs, 2 cm, polished, 2.66 × 1.77 m, yield ≈ 170 m² of wall

Onice Bianco MDC-261
39 slabs, 2 cm, polished, 2.80 × 1.69 m, yield ≈ 162 m² of wall

Onice Bianco MDC-262
35 slabs, 2 cm, polished, 2.70 × 1.77 m, yield ≈ 147 m² of wall

Onice Bianco MDC-92
10 slabs, 2 cm, polished, 2.81 × 1.73 m, yield ≈ 43 m² of wall
Frequently asked questions
What thickness should I choose for wall cladding in Onice Bianco?
For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 and 3 cm.
Is Onice Bianco suitable for wall cladding?
Yes, Onice Bianco (onyx) is worked for wall cladding in our workshop. The translucency of onyx shows at its best with LED backlighting, which brings out bands and veining; this is why the slabs are reinforced on the back.
How much Onice Bianco do you have now for wall cladding?
Right now 10 bundles that fit, with 423 slabs (1,946 m²) and thickness 2 and 3 cm; MDC-87 is the largest (55 slabs, 2.59 × 1.78 m).
Do you ship Onice Bianco outside Italy?
Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-87 weighs about 20.5 t, a useful figure for choosing truck or container.
How is Onice Bianco cladding fixed?
With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. With continuous backlighting choose low-heat LEDs and keep the onyx away from strong heat sources.
