Emperador Dark for floors: slabs and bundles in stock in Carrara
Ready in Carrara: 6 bundles of Emperador Dark (marble, brown) suited for floors. That is 240 slabs (1,108 m²), thickness 2 and 3 cm, finish polished; MDC-24 is the richest, with 52 slabs of 2.80 × 1.75 m. Imported directly and worked in our own workshops.
Why Emperador Dark for floors
Marble is a metamorphic limestone rock: it works well, takes a polish and has unique veining, but it reacts to acids (lemon, vinegar, some cleaners) that can dull the polished surface.
To floor large rooms, start from the number of slabs in one bundle: each bundle has its MDC number, the size of every slab, and can be reserved together.
On a marble floor the polished finish shows foot traffic wear over time; honed ages more evenly.
A stone of brown tone gives depth and contrast: it works next to light woods or white walls and asks for well-planned lighting.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
The slab is cut into squares, random lengths or geometric patterns; edges are finished sharp or with a small bevel, and the skirting comes from the same slab.
Indicative yield of the largest bundle: about 216 m² laid, after a 15% allowance for waste.
Laying and care
Over underfloor heating stone works well because it conducts heat: flexible adhesive and expansion joints are needed.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
Shipping and packing from Carrara
Open the bundle page, check the photo and size of every slab and send the request with the MDC number: we reply with availability and terms.
Bundles available

Emperador Dark MDC-24
52 slabs, 2 cm, polished, 2.80 × 1.75 m, yield ≈ 216 m² laid

Emperador Dark MDC-167
51 slabs, 3 cm, polished, 2.60 × 1.77 m, yield ≈ 199 m² laid

Emperador Dark MDC-169
44 slabs, 3 cm, polished, 2.65 × 1.74 m, yield ≈ 173 m² laid

Emperador Dark MDC-168
38 slabs, 2 cm, polished, 2.64 × 1.69 m, yield ≈ 144 m² laid

Emperador Dark MDC-171
37 slabs, 3 cm, polished, 2.58 × 1.72 m, yield ≈ 140 m² laid

Emperador Dark MDC-170
18 slabs, 2 cm, polished, 2.78 × 1.64 m, yield ≈ 69 m² laid
Frequently asked questions
What thickness should I choose for floors in Emperador Dark?
For indoor floors 2 cm is the most used thickness, 3 cm where traffic is heavy or the substrate is irregular. In stock: thickness 2 and 3 cm.
Is Emperador Dark suitable for floors?
Emperador Dark works for floors, as long as the right thickness (2 and 3 cm) and finish (polished) are chosen. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
How much Emperador Dark do you have now for floors?
Today in the Carrara warehouse: 6 bundles, 240 slabs, 1,108 m²; finish polished. Bundle MDC-24 has 52 slabs of about 2.80 × 1.75 m.
Do you ship Emperador Dark outside Italy?
We ship from Carrara worldwide: slabs travel on A-frames or in ISPM 15 treated wooden crates, with corner guards and protection, and the bundle is loaded into a container or onto a truck. Times and costs are in the quote.
How is a floor in Emperador Dark laid and kept?
It is laid on a flat screed with a suitable adhesive and thin joints. For daily cleaning water and a pH-neutral detergent are enough; avoid acids, descalers and abrasive sponges, which dull polished marble.
