Calacatta Gold for wall cladding: slabs and bundles in stock in Carrara
Calacatta Gold for wall cladding: the warehouse holds 6 bundles with thickness 2 and 3 cm, in all 274 slabs and 1,272 m², finish polished. Bundle MDC-182 (52 slabs, 2.79 × 1.76 m) is the one to start from when you need a lot of material with the same veining. From our own quarries.
Why Calacatta Gold for wall cladding
Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.
To clad a wall, 2 cm slabs are cut to size, also book-matched for a symmetrical pattern.
The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.
Thickness, weight and workmanship
In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².
Consecutive slabs give book-matched panels, trimmed flush and mitred at 45° for the corners.
Indicative yield of the largest bundle: about 225 m² of wall, after a 12% allowance for waste.
Laying and care
The substrate must be flat and dry; for large-format slabs levelling systems and two people are used.
Of these bundles 3 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.
Shipping and packing from Carrara
If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.
Bundles available

Calacatta Gold MDC-182
52 slabs, 2 cm, polished, 2.79 × 1.76 m, yield ≈ 225 m² of wall

Calacatta Gold MDC-179
49 slabs, 3 cm, polished, 2.58 × 1.75 m, yield ≈ 195 m² of wall

Calacatta Gold MDC-181
49 slabs, 2 cm, polished, 2.64 × 1.77 m, yield ≈ 201 m² of wall

Calacatta Gold MDC-180
47 slabs, 2 cm, polished, 2.63 × 1.61 m, yield ≈ 176 m² of wall

Calacatta Gold MDC-178
41 slabs, 2 cm, polished, 2.80 × 1.71 m, yield ≈ 173 m² of wall

Calacatta Gold MDC-26
36 slabs, 3 cm, polished, 2.68 × 1.75 m, yield ≈ 149 m² of wall
Frequently asked questions
What thickness should I choose for wall cladding in Calacatta Gold?
For wall cladding 2 cm is enough; 3 cm is used for very large slabs or mechanical fixing. In stock: thickness 2 and 3 cm.
Is Calacatta Gold suitable for wall cladding?
Yes, Calacatta Gold (marble) is worked for wall cladding in our workshop. In marble every slab has its own veining: choosing slabs from the same bundle keeps the pattern continuous from one piece to the next.
How much Calacatta Gold do you have now for wall cladding?
Right now 6 bundles that fit, with 274 slabs (1,272 m²) and thickness 2 and 3 cm; MDC-182 is the largest (52 slabs, 2.79 × 1.76 m).
Do you ship Calacatta Gold outside Italy?
Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-182 weighs about 13.8 t, a useful figure for choosing truck or container.
How is Calacatta Gold cladding fixed?
With adhesive suited to the weight or mechanical anchors for large slabs, on a flat, dry substrate. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.
