Marmi di Carrara, since 1956
Get a quote

Inventory · Bianco Carrara

Bianco Carrara for vanity tops: slabs and bundles in stock in Carrara

Bianco Carrara for vanity tops: the warehouse holds 17 bundles with thickness 2 and 3 cm, in all 685 slabs and 3,141 m², finish honed and polished. Bundle MDC-292 (50 slabs, 2.81 × 1.76 m) is the one to start from when you need a lot of material with the same veining. From our own quarries.

Bianco Carrara, white marble from the Apuan Alps, recommended for floors and wall cladding, stairs and tables and furniture.

Why Bianco Carrara for vanity tops

Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

A vanity top is a small but very visible piece: it is cut from a well-chosen slab, with a cut-out for the basin and a drip edge on the front.

On a marble vanity top perfumes, dyes and toothpaste can leave marks: a sealer and a honed finish help.

The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 and 3 cm. 2 cm ≈ 54 kg/m²; 3 cm ≈ 81 kg/m².

The top is cut to size with a basin cut-out (drop-in or undermount), holes for taps and an edge of your choice; an upstand can be added.

Indicative yield: each slab (2.81 × 1.76 m) gives about 6 tops of 120 × 50 cm, about 300 in the largest bundle.

Laying and care

Tap holes are made in the workshop, not on site: the stone can chip.

Of these bundles 6 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 46 blocks of Bianco Carrara in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.

Bundles available

Frequently asked questions

What thickness should I choose for vanity tops in Bianco Carrara?

For a vanity top 2 or 3 cm is fine; at 2 cm the front edge is doubled. In stock: thickness 2 and 3 cm.

Is Bianco Carrara suitable for vanity tops?

Yes, Bianco Carrara (marble) is worked for vanity tops in our workshop. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

How much Bianco Carrara do you have now for vanity tops?

Right now 17 bundles that fit, with 685 slabs (3,141 m²) and thickness 2 and 3 cm; MDC-292 is the largest (50 slabs, 2.81 × 1.76 m).

Do you ship Bianco Carrara outside Italy?

Before shipping we photograph the bundle and prepare a slab-by-slab list with numbers and sizes; the type of packing (A-frames or crates) depends on destination and vehicle.

How do I protect a vanity top in Bianco Carrara?

With a water-based sealer after laying and a soft cloth to dry it. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp
Bianco Carrara for vanity tops · slabs in Carrara