Marmi di Carrara, since 1956
Get a quote

Inventory · Arabescato Cervaiole

Arabescato Cervaiole for fireplaces: slabs and bundles in stock in Carrara

Ready in Carrara: 3 bundles of Arabescato Cervaiole (marble, white) suited for fireplaces. That is 131 slabs (598 m²), thickness 2 cm, finish polished and honed; MDC-200 is the richest, with 54 slabs of 2.60 × 1.75 m. Imported directly and worked in our own workshops.

Why Arabescato Cervaiole for fireplaces

Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

In a fireplace symmetry matters: two jambs and a lintel cut from the same slab or from consecutive slabs give a continuous pattern.

The light tone (white) reflects light and brightens rooms, but it shows stains and marks: the choice of finish matters more than with dark tones.

Thickness, weight and workmanship

In stock: thickness 2 cm. 2 cm ≈ 54 kg/m².

Indicative values for Arabescato Cervaiole from the data sheet: density 2,710 kg/m³, water absorption 0.11%, compressive strength 87.4 MPa and flexural strength 17.8 MPa.

Wall-mounted or island fireplaces can be made, with numbered slabs and hidden fixings.

Indicative yield: each slab (2.60 × 1.75 m) gives about 6 pieces of 150 × 40 cm (jambs, mantels), about 324 in the largest bundle.

Laying and care

The safety distance from the firebox is checked with the fireplace installer before cutting.

Of these bundles 2 are book-matched: consecutive polished slabs from the same block, to be laid as a mirror.

We also hold 2 blocks of Arabescato Cervaiole in stock: for a large project the block can be chosen and sawn to size.

Shipping and packing from Carrara

If you do not yet know how many m² you need, use the slab calculator and then ask for the quote; we can reserve several slabs of the same bundle for you.

Bundles available

Frequently asked questions

What thickness should I choose for fireplaces in Arabescato Cervaiole?

To clad a fireplace 2 or 3 cm is enough, depending on whether the slab is set in place or fixed mechanically. In stock: thickness 2 cm.

Is Arabescato Cervaiole suitable for fireplaces?

Yes, Arabescato Cervaiole (marble) is worked for fireplaces in our workshop. Marble can be honed or polished, and a water-based protective treatment helps repel oil and wine stains without changing how the stone looks.

How much Arabescato Cervaiole do you have now for fireplaces?

Right now 3 bundles that fit, with 131 slabs (598 m²) and thickness 2 cm; MDC-200 is the largest (54 slabs, 2.60 × 1.75 m).

Do you ship Arabescato Cervaiole outside Italy?

Slabs are packed on A-frames or in crates, strapped down and protected at the corners; bundle MDC-200 weighs about 13.2 t, a useful figure for choosing truck or container.

Can Arabescato Cervaiole be used around a fireplace?

Yes as a surround, kept apart from the firebox with a refractory backing: the safety distance is checked with the installer. A protective treatment repeated now and then repels oil and wine; marked marble can be re-polished in the workshop.

WhatsApp
Arabescato Cervaiole for fireplaces · slabs in Carrara